Normal 0
- Clean surfaces with neutral, mild household cleaners, few drops of dishwashing detergent or Murphy’s Oil Soap®” and warm water or use natural stone care products.
- Too much cleaner or soap may leave a film and cause streaks. If this happens, clean up excess soapy film with clear, warm water and a clean sponge or rag.
- Dry the surface after cleaning with a soft cloth.
- Clean spills immediately.
- Don’t use bleach, vinegar, lemon juice or other cleaners containing acids or ammonia such as Windex. The high acid content can dull the finish.
- Do not use abrasive scouring powders or liquids; these products contain abrasive chemicals or ammonia that may damage the surface. If required, use a non-abrasive cleaning product and a Scotch-Brite® Blue “no-scratch” pad. Do not hesitate to apply hand-pressure needed to rub out any marks.
- Adhered materials like gum, food, nail polish, or paint can be scraped away with a plastic putty knife. Rinse the surface with clean water to remove residue.
- Avoid contact with harsh chemicals, such as: bleach, paint strippers, oven cleaners, or drain cleaners.
- Preserving your natural stone is simple. Apply topical sealant or coating every year. It will also enhance the surface sheen.
- Sealing the surface of the stone creates a moisture barrier. It eliminates moisture penetration, slows down or eliminates staining.
- If there are any pores on the surface of the stone, apply a penetrating sealer. One-step formula designed to deeply penetrate the pores of the surface creates a superior stain protection barrier. It will enhance the appearance and it will last for many years.
A little different principles apply to marble countertops care and maintenance. Marble is a softer stone that granite and needs a different care to stay beautiful and shiny.